Club Classifieds

Going For a Song

 14' Surfcat in good condition, with licenced trailer. To enquire, or to view at Middleton Beach, please call Terry Taylor on 0488 554 478 or email tandbtaylor@bigpond.com.

Djinn for Sale

Djinn is a Van de Strat Spirit 28 with a full sail wardrobe and a Bukh diesel inboard.

It also has:

• 100lt Freshwater tank with an electric pump
• 2 radios
• EPIRB
• flares & lifejackets
• metho stove
• icebox
• wind gauges
• solar panels and near new batteries
• New opening ports not fitted
• Heaps of other gear, including 20L+ of antifoul

To enquire, call John on  0412 420 386.

$5000 ONO

John Riches has a 22 foot Herman Borrow (Star) aluminium yacht of classic design for sale. It's had some work done to the outside but below deck needs as complete refit. It has a new battery and is fitted with a 3.5Hp Tohatsu outboard motor. 

The trailer has new brakes and bearings and the boat is freshly painted all over - both deck and hull.

Please call John on 0409 118 255 to arrange a viewing in Gairdner.

For Sale

• 2 large galvanised shackles -$130 for both (originally $130 each)
• 2 large galvanised thimbles - $50 for both (originally $50 each)

Contact Colin on 0427 098 098.

Shed cleanout

I am cleaning out the shed and some gear from the boat. All items are new unless otherwise stated. Most items that are new are offered at half price or less (excluding rope and a few other things). Some items are advertised elsewhere.

Contact Hank on 0419 849 879, or hankonthewater@bigpond.com.

1. Autopilot Coursemaster CM600, although now 15-18 years old, never installed or used, includes, rudder sesnsor, flux compass, main board, and display, manual; can be used for hydraulic system or linear drive, (the latter 2 items are not included) $400

2. Autopilot hydraulic pump Octopus, 1212 model, $400

3. Bolt cutters 30” / 75 cm, not new, but beaks are perfect, made in Japan, $60

4. Boom, round Aluminium 115mm, 4.4 mt long, SS endcaps, used $50

5. Boot hooks, choice of 3 well used ones from $10 to $20

6. Circuit breakers DC, 100 amp made in USA $50

7. Circuit breakers DC, 100 amp, made in ??, new one $25, used one $20

8. Circular saw, Ryobi, 8.25”, with tungsten tipped blade, sharp in good order, used, $40

9. Cleats, various plastic, aluminium and stainless steel, most are used

10. Containers/jerrycans for diesel or petrol, used $20 each

11. Door/hatch catches, a few in SS available

12. Door/hatch catches, plastic, mostly white, a few black, $5 each, approx. 30 available

13. Exhaust hose, 38 mm, 0.7 mt, 38 mm, $5

14. Fibreglassing stuff, acetone 4lt $15

15. Fibreglassing stuff, bottle of MEK

16. Fibreglassing stuff, chop mat 450 g, many metres

17. Fibreglassing stuff, woven mat about 950 g, many metres

18. Float, large pear shaped black (hard) plastic, approx. 500 mm, as mooring buoy, used $25

19. Fridge, with small freezer compartment, Electrolux, runs on 12 Volt, gas and 230 Volt, however not really suitable for a heeling sailing boat, good for powerboats and caravans, works well, used $250

20. Genoa cars for tracks 19, 25 and 32 mm, all used, from $25 each

21. Jigsaw, AEG for 230 Volt, as new, $35

22. Marinedeck, cork (check https://www.marinedeck.nl/en/content/welcome-board), some 50 and 75 mm wide planks, 9 mm thick, about 3.5 M2 in total, can instruct how to install

23. Outboard, Honda 2 HP, 4 stroke, running well, kill switch at times not working, will fix that, used $250

24. Panel meters, digital, for Volt, and Amps, choice of about 10 units, $10 each, shunts are extra if needed

25. Plastic cladding to line showers, cabins, ceilings, 3mm thick, PVC, new about 15 M2

26. Rope, 16 mm nylon, 3 strand, approx. 60 mt, $3.50 per mt

27. Rope, 18 mm poly ethylene rope (silver rope), 3 strand, NZ made, approx. 60 mt,  $2.50 per mt

28. Rope, 24 mm rope PE (silver) 3 strand, NZ made, approx. 50 mt, $5 per mt

29. Rope, double braid variety of diameters (mostly 10 to 16 mm)  and assorted lengths, mostly used, good for halyards, sheets, docking lines

30. Seacocks bronze, 38 and 50 mm

31. Selftailing winch Arco 40,  new,  two for $1000 (will not split)

32. Sheet MDF 14 mm (900x2400) $15

33. Sheet MDF 19 mm (1200x2400) $30

34. Silicone guns, used, $2 each

35. Single, double and triple blocks, turning blocks, from 25 to 75 mm, nearly all new

36. Skin fittings bronze 38 and 50 mm

37. Skin fittings SS 1” and 1.5” (25 and 38 mm)

38. Skin fittings, plastic, at least 20 of them , mostly new, from ½ to 2” (12 to 50 mm)

39. Solar and wind controller (for air marine and air X only), Blue Sky, wind controller is working, $30

40. Solar controller Blue Sky, 20 amp, controller working, voltage display is not, $40

41. Solar controller Steca 30 Amp, 12 Volt, working well, used, $100

42. Solar panel Unisolar 60 watt, near new, $70

43. SS deck fillers: water, diesel and waste, $20 each

44. Steering pump hydraulic, with SS wheel to fit, used but working well, $150;  to install on boat one needs a hydraulic ram as well

45. Stirling automatic battery isolator/combiner, 240 Amp, choice of two (if I sell one, will keep the other)

46. Tank fittings, mostly by Hansen (made in NZ), black PE, in sizes from ½”to 2”, come browse through the large tub of hundreds of items

47. Taps hot and cold mixing for sink (for use with pump)

48. Tile cutter, used $5

49. Toilet seat TMC, may fit other brands as well, new, $10

50. Valves, ball,  SS ¾” and 1”

51. Waterpumps electric, choice of 3 new, all for sink/shower etc. 12 Volt

52. Waterpumps, driven by engine, one is new, 3 are used, ie for salt or fresh water cooling, from $40 to $200

53. Wind controller, only for those wind generators with internal brake like Air Marine, Blue Sky, with circuit breaker, amp meter is not always working, used, $25

54. Workbench, chipboard top 1200x2400, heavy steel frame for legs and shelf under top, $100, delivery is extra

I have also SS (316 type) nuts/bolts and self tappers in most sizes. Although I want to keep a range of these on my boat, I have many surplus to my needs. Just ask.

Casual Bar Staff Required

PRSC seeks keen and RSA-certified casual bar staff from January 2020 onward. 

Regular Friday and Saturday evening shifts are available, as well as others as required to suit functions.

Applicants are encouraged to contact Bar Manager Sue Vickers on 0448 891 926. Experience preferred but not essential.

For Sale: Ailsa

Doc Watson’s much loved MB24 Ailsa is for sale.

This boat is:

• Ideal for racing or cruising

• Equipped with an inboard diesel

• Has four jibs and four spinnakers

Most recent survey is available.

Ailsa is for sale for $6000 ono. Phone 9842 2604 for more information.